V100D06 by Walkera

I am so happy for that I have gotten a new product of Walkera-the Walkera V100D06. It is very great. And it is a fine that can fly indoor.

The design of flybarless balance characterizes low power loss and great efficiency improvement. Three-Axis- gyro in receiver control makes the Flybarless balance system automatically amend the flight status and provide favorable safety for the beginners. Mini size and fine appearance,striking personality. 2.4G Frequency-Hopping Spread Spectrum technology automatically assigns ID code with strong anti-jamming and high accuracy. The drive offered by motors is 3.7V500mAh LiPo battery pack,smoothand powerful, the flight time will be up to 9 to 11 minutes depending on your flight mode.

Thanks to the great success of the top of the line WK2801 transmitter, Walkera used the same appearance and make the new WK2403 4 Channel LCD display, 2.4 GHz Digital Transmitter. Say goodbye to flicking switches at the back and guessing which button is for which purpose; by using the new Walkera WK2403 transmitter, you can easily adjust the servo directions, channel trimmings, or throttle modes from the LCD display.

Flybarless design, with less power loss, greatly improves the cycle length and flight time; Three-Axis- gyro in receiver control makes the Flybarless balance system automatically amend the flight status and provide favorable safety for the beginners Mini size and striking appearance; 2.4G Frequency-Hopping Spread Spectrum technology automatically assigns ID code with strong anti-jamming and high accuracy; Strong magnetic carbon brush motor features is highly efficient and provides smooth power output.

Two separate digital servos are used to control the cycle pitch, ensuring the efficiency of Flybarless Control System for an excellent flight performance; Newly designed tail blade set, transmitted by cone-shaped bearing, features prompt response and outstanding head locking; 3.7V 500mAh Lipo battery offers about 10-minute flight time per cycle, (depending on the flight mode); The transmitter WK-2403 with LCD screen provides Height Limit lever and Dual Rate switch for the beginners to practice. 
All in all, it is a real great product. If you also want to buy one just to the rctophobby.

Great Wing Tiger to You All

Hey all. See you again. Are you waiting for my rc toys? I would like to share one of the Art-tech rc airplanes with you today. Follow me!

Art-tech's latest Wing-Tiger Brushless RC Airplane is a 500 class EPO trainer , including the Wing Leveler System with stable flight, with module design and easy to assemble, steerable nose wheel and maneuverable on the ground and easy to take off, brushless motor with strong power!

Waht Wing Leveler System does this Airplane use? Look at bellow： With the aim to lower the crash incident maximally, Art-Tech team developed an Wing Leveler System especial for airplanes.Then, the device can balance the model automatically during the flying, even under the windy condition.Thirdly, the Wing leveler system will greatly reduce the crash incidents for the beginners, as only with enough throttle, it can keep the model balanced well. At last, the balancing function of the device can be shut down by transmitter easily.

This leveler system does not incorporate with auto-pilot and Altitude-detection features, you (beginner) should always keep your airplane within comfortable flying zone to avoid any accidents. Beginner may loose control of the airplane or loose sight of airplane as model out of sight range. Meanwhile you should keep your airplane about 50 meters above the ground to gain enough time for the system to correct airplane gesture.

It is a 500 class EPO-material trainer with module design, strong power large outrunner motor giving maximum torque and loads of power, 2.4GHz spread spectrum radio equipment all pre fitted and ready to use. A high capacity Li-Po battery not included to give extended flight times, all packaged in a high density strong, but light, foam airframe.Don't miss it from rctophobby.com

New Product of Align

As we all know that Align is a very good rc brand. Now let me introduce a great product of it to you all which is just the Align T-REX 100X.

Brand new rotor head to main shaft attachment design, improving flight stability and minimize vibration. Transmitter sticks’ tension can be adjusted to suit pilot’s preference. High contrast LCD display screen. Extended tail boom to improve gyro tail locking ability and overall controllability. Remote gyro gain adjustment on transmitter for ease of tail tuning. Supports iPhone/Android as controller using specific transmitter attachment. Brand new canopy design. Utilizes AFHDS 2.4Ghz automatic frequency hopping technology for stable signal and interference avoidance. Transmitter has trainer port capable of interfacing with third party flight simulators on PC. Interface cable is included. Support mode 1, 2, and 3 transmitter stick layout. Increased flybar paddle to effectively increase flight stability.

Utilizes hobby grade micro servos and increased frame rigidity, for flight stability, crash survivability, and longevity. Built in Nimh and Lipo battery charger which can be used while flying. Convenient USB charging jack allowing universal compatibility with PC’s USB port, or any 5v USB travel charger to charge transmitter’s Nimh battery. Charging status and capacity display. 5-in-1 circuitry includes receiver, ESC, heading lock gyro, servos, and mixing function.

Don’t hesitate to get it home from rctophobby. It is a really good rc helicopter that cannot be missed.

Some encellent parts of Esky

As you know, Esky is a very good rc brand. And you cannot miss the parts of Esky if you are a real enthusiast. There are many products witch are suitable for you. Now let me introduce some fine products to you. Just follow me. 
1、Esky Bearing Holder for Drive Belt Wheel 
Features: Esky Bearing Holder for Drive Belt Wheel has tow model numbers: the Model No is EK5-0450 and the New Model No is 001618. This model is compatible with the following model(s): Esky Belt-CP CX Esky Belt-CP; Esky Belt-CP V2. 

2、Esky Aluminum Screw Cannula 
Features: Esky Aluminum Screw Cannula has many new features just like the follows: Model No: EK5-0451; New Model No: 001619. This product is compatible with the following model(s): Esky Belt-CP; Esky Belt-CP CX; Esky Belt-CP V2.

3、Special Shaft For EK5-0201 
Features of Esky Special Shaft For EK5-0201: The EK5-201 upgrade uses a thicker feathering shaft, this is a replacement for this shaft. This shaft is 48mm long, if you need the 43mm shaft the part number is 002138. Different versions of the heads use different shafts so please check the length before purchasing. It is compatible with the following model(s): Esky Belt-CP CX;Esky Belt-CP;Esky Belt-CP V2;Esky Honey Bee King 2 II;Esky Honey Bee King 3 III. 

4、Esky 000649 Inner shaft B 
Features of the Esky Inner Shaft B: the Model No is EK1-0363 and the other New Model No is 000649. It is compatible with the following model(s): Esky Big Lama; Esky E-500. 

There many other Esky parts also. Let me see you next time. If you want to get them just click this website: www.rctophobby .com

A Super Dynam Plane

At this time we only have available crash proofed Dynam T-28 (crash proofing installed) or with crash proofing kit and foam prep (foam is drilled and grooved for rods). We apologize for any inconvenience but you should be getting the crash proofing anyway! Finally a T-28 that leaves others in the DUST! Robust and beautiful, with that sharp T-28 dihedral and the distinctive lines- s seriously gorgeous job by Dynam, once again. She's also got Servoless Retracts with steerable nosegear, nav lights, and a great slotted flap design with beautiful hinges and buried control rods that turn this baby into an anti-gravity machine (you just need to add a flap kit to hook them up, and a 6 channel Tx//Rx). The addition of our crashproofing kit makes her far sturdier a must for beginner level pilots, and a must for anybody who wants to do serious combat style aerobatics. Just the right size, she is big, but she fits nicely in any car without removing wings or anything- toss her in the back seat and take her to the field for a spin!

The Dynam T-28 is a fantastic plane with great looks, great handling, great powertrain, great Transmitter (the exponential knob on the transmitter is something I wish the Spektrum DX7 had!), great foam, great engineering and design, great crashproofing kit, great retracts (some of the best fitting retracts on the market today!), great high speed flight with a 4 cell, and even great quality paint and decals. Little Billy Pilot needs to be pushed out without a chute at 1000 feet, but everything else is perfect!

This line of Dynam fighters (the 1200mm wingspan lineup) is big enough for great solid feel and handling and a kickin' presence in the sky- they are all a SERIOUS thrill to fly! When you get one, you'll be emailing me to say "Boy, were you right!" Even the retracts are praiseworthy- solid, with great action and realistic speed, and they have a built in timer that keeps them from collapsing when you plug in the plane- they won't move for about 15 seconds after you plug in the battery- a great design!

The planes are SOLID, made of really good EPO foam that can take a beating, they have Carbon Fiber wingspars, and they're designed in a way that makes the installation of Crashproofing very effective- I am seriously impressed with these planes! They have interchangable "drive trains"- same ESC, motor, and prop on all 3, making maintainance less expensive and simpler. The one drawback for Dynam planes is the inexpensive packing- it's where they save some bucks, helping to make these planes FAR less expensive than they should be. If you can't hack the occasional ding, go FMS- they have great packing materials) I'll say this: all these Dynam fighters are already in my permanent stable, and I absolutely LOVE the way they fly!

Perfect Art Tech 400 Class Falcon CCPM

It is a perfect 3D 400 Class Falcon CCPM for beginners. 
The helicopter looks really nice with its red, white and blue canopy. This is a 400 size helicopter with a 45 degree flybar that offers the agility of a CCPM helicopter. The leading gear is sturdy and attaches directly to the frame. The user manual is well written and isn’t written in Chinglish! Also included in the box is a CD containing simulator software. You also get a simulator cable that plugs into the transmitter. These is also a transmitter manual and simulator. The heli manual contain an exploded diagram and disassembly instructions as well as a full parts lists. The battery tray is part of frame and limits your battery choices to batteries that are 1/4 inches wide or less. You can go taller and longer but no more width! The battery weighs 101 grams. I have a 25C, 1500mah battery that fits in the tray and weighs 134 grams. Since the stock motor is brushed, I’ll have to stick with slightly shorter flights.

400_class_falcon_ccpm

Highlights: 400 Class Falcon CCPM Heli Perfect 400class 3D helicopter for the beginners and intermediate pilots due to CCPM mode. Specifications: Easy to control and capable of all 3D maneuvers due to CCPM mode Durable and convenient for disassembly Awesome look and style with silk screen printing on the canopy and main blade 2.4GHz System

art-tech_falcon_ccpm

My actual first thought was, “Wow”! I mean, I’ve owned three or four 6 channel CCPM helicopters and I was always terrified to spool them up in the house and even attempt a hover. Without doing anything I plugged in the battery and spooled the Falcon up. Seconds latter, it was floating in my small upstairs office. Don’t get me wrong, I was fighting it. The helicopter was not at all trimmed out, so I only hovered it for about 20-30 secondes before bring it down safely. Although the heli packaged and looked beautiful, I was expecting to be the setup right out of the box. It is, after all, a “beginner helicopter”. It would be nice if the heli flaw tamely, right out of the box. Not the case here. The first thing I noticed is a wing right in the tail. Even with full left trim I was constantly correcting the rudder. I had to adjust the rudder servo and tail slider length to get the tail to hold with no transmitter trim. These was also a slight backwards drift. It is really an excellent helicopter. Don’t hesitate to get it home from rctophobby.com

Ultra light indoor model aircraft

It has been two years only from the last time I tried to make a ultra-light indoor model aircraft, but there is a considerable progress and advancement in miniature electronic devices. In International Model Exhibition of Beijing in 2008 one kinds of 2g Power Group Set attracted my attention which includes a brushless motor, monotonous, 4 channel receiver, two servos, 300mAh lithium polymer battery (monomer) and direct-drive small propeller. Because its motor weighs only 2g, it is named 2g 2g Power Group Set. The greatest feature of this set is that its receiver can use lithium-polymer battery(Voltage is about 3.7V) as power source. I immediately bought a set shot because of its excellent performance hoping to make a better model ultralight aircraft.

How to create a ultra light model airplanes that is full of personality? I cannot help thinking about “Bee Movie” a 3D cartoon launched by American Dream Works. In the very popular animated film, a small yellow airplane attracted my attention deeply using its bright colors and very cute style. From then on, to own this airplane become my dream. So, I prepare to copy a ultralight aircraft model according to the yellow small aircraft in the movie. I do not know the specific size of the airplane but I can get its wingspan, chord, full-length, the last arm and other parameters’proportional relationship that closely related with aircraft’s performance through its shot photos in different angles and perspective relationship and calculating.

However, it is not easy to make a ultralight aircraft model with the small yellow airplane’s structure and layout. I prepare to do it by three stages. The problem that must be solved at first is that: How large and how heavy model airplanes are suitable for 2g power group set? I tried making a small size model with foam wings to determine the model's feet.
I would like to detail how to determine the size of a model airplane, see you next time!